Akai MPC Touch, Руководство пользователя

Страница: 208 / 322

208
Use the
Reverse button to select in which direction the sample will play. When on, the sample will play in reverse.
When off, the sample will play in the normal forward direction.
Use the
Pad Loop
button to cycle through the available Pad Loop modes.
Important : For Pad Loop to work, you must ( 1 ) set the Sample Play field (in the Master tab) to Note On instead of
One Shot and (
2
) set the
Slice
field (in the first
Samples
tab) to
Pad
instead of All or a slice number.
Off : The sample will not loop.
Forward : You can hold down the pad to cause that sample to repeat from the Loop Position
to the end of the sample. Release the pad to stop the repeating playback.
Reverse
: You can hold down the
pad
to cause that sample to play in reverse, repeating from
the end of the sample to the Loop Position . Release the pad to stop the repeating playback.
Alternating
: You can hold down the
pad
to cause that sample to play from the
Loop Position
to
the end of the sample and then play in reverse until it reaches the
Loop Position
again. This will
repeat as long as you are holding the pad down. Release the pad to stop the repeating playback.