Akai MPC Touch Скачать руководство пользователя страница 10

Страница: 10 / 322

Data Dial

Use this dial to scroll through the available menu options or adjust the parameter values of the

selected field on the screen.

–

: Press these buttons to increase or decrease the value of the selected field on the screen.

Numeric Keypad

: If the selected field on the screen is a number, press these numbered buttons as you would

on a standard numeric keypad to enter a value. Press the keypad’s

Enter

to enter it. (A numeric keypad with

additional operations will appear on the screen, as well.)

Undo

Redo

: Press this button to undo your last action.

Press and hold

Shift

and press this button to redo the last action you undid.

Shift

: Press and hold this button to access some buttons’ secondary functions (indicated by

red

writing).

Double-press this button to see which buttons have secondary functions—the buttons will flash for a few seconds.

F-Key

: Press this button to activate or deactivate the F-Key feature. When active, the six buttons under the

touchscreen correspond to the options shown at the bottom edge of the screen. The F-Key button and those six
buttons will be lit

red

when active. When inactive, the six buttons under the touchscreen will access their normal

modes instead (

Menu

Browser

Step Seq

Sampler

XYFX

, and

Looper

Pad & Q-Link Controls

Q-Link Knobs

: Turn these touch-sensitive knobs to adjust various parameters and settings. The display strip

above each knob indicates the parameter it is controlling. If the display strip shows a meter to indicate its value,

you can touch or turn its Q-Link knob to temporarily show its precise numerical value.

10.

Pads

: Press these pads to trigger drum hits or other samples in your software. The pads are velocity-sensitive

and pressure-sensitive, which makes them very responsive and intuitive to play. The pads will light up different

colors, depending on how hard you play them (ranging from yellow at a low velocity to red at the highest
velocity). You can also customize their colors.

11.

Pad Bank

: Press these buttons to access Pad Banks A–D.

Press and hold

Shift

while pressing these buttons to access Pad Banks E–H. Alternatively, double-press one of

these buttons.

12.

Copy

Delete

: Press this button to copy one pad to another. When the

From Pad

field is selected, press the

“source” pad (the pad you want to copy). When the

To Pad

graphic (of all pads) is selected, press the

“destination” pad. You can select multiple destination pads, and you can select pads in different pad banks. Tap

Do It

to continue or

Close

to return to the previous screen.

Tip

To quickly copy a pad

, press and hold

Copy

, press the source pad, press the destination pad, and then

release

Copy

Press and hold

Shift

and press this button to delete a pad’s sample assignment. When the

Delete Pad

window

is shown, press any pad/pads whose sample assignments you want to clear. Tap

Delete

to continue or

Cancel

to return to the previous screen.

13.

Full Level

Half Level

: Press this button to activate or deactivate the Full Level feature. When activated, the pads

will always trigger their samples at the maximum velocity (

127

), regardless of how much force you use.

Press and hold

Shift

and then press this button to activate or deactivate the Half Level feature. When activated,

the pads will always trigger their samples at half-velocity (

14.

16 Level

Press this button to activate/deactivate 16 Level. When activated, the last pad that was hit will be

temporarily copied to all 16 pads. The pads will now output the same note number as the initial pad, but a

selectable parameter will be fixed at values that increase as the pad numbers increase (e.g., Pad 1 is the minimum,
Pad 16 is the maximum), regardless of how hard you press them. In the screen that appears, use the

Type

selector

to choose the parameter:

Velocity

Tune

Filter

Layer

Attack

, or

Decay

. See

Operation