251
Insert Effects
When the
Insert
tab is selected, use the
data dial
or
–
/
+
buttons to open a window where you can select an effect
for the currently selected pad.
Instead of level sliders, there are fields that display 0–4 boxes to indicate which insert slots have a loaded effect.
The level meters in each pad show a visual representation of the level. Double-tap a
pad
on the screen to open a
window where you can load, change, and enable or disable the effects for all four insert slots.
You can select up to
four insert effects
for each pad. You can use various effects included in your MPC hardware as
well as other VST and AU plugins installed on your computer. Tap the
Insert
button to cycle through the four available
slots for each.
To learn how to use insert effects, please see
General Features
>
Effects
>
Insert Effects
.
Important
:
When using keygroup insert effects, they will be applied to that keygroup only. Keep this in mind if you load insert
effects to multiple keygroups with overlapping note ranges—the effects will overlap in that range as well.
If a routing
is set to anything other than
Program
, then a program insert effect will
not
be applied to that pad or keygroup.
Routing
When the
Route
tab is selected, use the
data dial
or
–
/
+
buttons to select the output of the currently selected pad.
Usually, this is set to
Program
. Double-tap a
pad
on the screen to select a different destination:
Out 1,2
–
7,8
or
Out
1
–
8
in Standalone Mode,
Out 1,2
–
31,32
or
Out 1
–
32
in Controller Mode. You can also select a submix (
Sub 1
–
8
) in
Controller Mode.
Note
: When set to a mono channel, the left and right channels are summed post-pan knob. If the pan knob is set to
the center position, the left and right channels will be summed and padded. If the pan knob is set to the maximum
left or right positions, only the respective channel will be sent to the output.
Содержание MPC Touch
Страница 1: ...User Guide English Manual Version 2 0 8...
Страница 322: ......
