Chapter 4 – Lubrication
Service manual AJP PR3/PR4 4 - 4
Oil pipe racord on the clutch cover
(M10x1,25):
34N.m (3,5Kgf.m)
Banjos screws of the oil pipes on the radiator
(M12x1,25):
34N.m (3,5Kgf.m)
Put the engine running and check the perfect
sealing of the lubrication circuit, making sure
that there is no oil leakage.
CENTRIFUGAL OIL FILTER
ROTOR
This centrifugal rotor (1) is on the engine
crankshaft, wherein whose walls are being
deposited small burrs due to the action of
centrifugal force as the oil for lubricating
passes by the connecting rod / crankshaft
during engine operation.
Periodically should be done a cleaning to this
filter / rotor. It is recommended that this be
done every 12.000 Km, or when is necessary
to change the clutch plates.
Removal
To remove this centrifugal rotor the following
steps should be followed:
Support the motorcycle on its side stand;
Drain the engine oil (page 3-5);
Remove the brake pedal;
Remove the kick starter pedal (if
applicable);
Remove the clutch cable on the lever on
the engine;
Remove all the screws and remove the
right crankcase cover;
