Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 515 / 580

C o m m i ssion ing M anu al M an ag i n g T r ap s
2.
3.
4.
5.
a.
b.
c.
6.
7.
To ensure that the received signals are from a valid community, select the
Authentication Trap check box. Any attempt of an unauthorized user to access
the BSR, a trap will be sent indicating this.
To receive E
2
traps, select the E2 Trap check box. The E
2
traps are generated
when the database memory is corrupted. The RF has a separate memory, and if
this memory cannot be accessed, an RF E
2
alarm is generated approximately
every 30 seconds.
To acknowledge that synchronization of BSR was lost and prevent its
continuous generation, click the
Acknowledge Sync Lost Trap button.
To receive and define temperature traps from the BSR, perform the following:
Select the Temperature Trap check box
On the High Temperature Threshold slide ruler, move the ruler to the
temperature above which you want a temperature trap to be generated.
On the Low Temperature Threshold slide ruler, move the ruler to the
temperature below which you want a temperature trap to be generated.
To receive traps indicating that SPR/IDR devices have been associated
(connected) with the BSR, select the
Association Connect Trap check box.
To receive traps indicating that an SPR/IDR has connected to the BSR through
AutoConnect, select the
AutoConnect Trap from BSR check box.
01040311-07 Airspan Networks Inc. 25-11