Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 265 / 580

C o m m i ssion ing M anu al E st ab l i sh i n g B S R - S P R L i n k w i t h Au t o C o n n ect
The description of the AutoConnect trap messages are described in Table 8-2
Table 8-2: Description of AutoConnect trap messages
Trap Message Meaning
AutoConnect: On: <SPR index
number>
The SPR index number is in AutoConnect
mode (after an SPR device disconnected from it
and AutoDisconnect interval has ended),
available for accepting an SPR device
connecting to BSR using the AutoConnect
feature.
AutoConnect: Off: <SPR index
number>
The SPR index (for AutoConnect) has an SPR
device connected to it using AutoConnect and
is therefore, not in available for receiving
another SPR through AutoConnect.
AutoConnect to <BSR IP address>-
<SPR index icon>, <SPR’s
Ethernet MAC address>-<connected
to BSR at certain decibels
(dBm)>. Ver: <SPR device’s
software version>
SPR device was connected to the BSR using
AutoConnect feature.
<SPR’s Ethernet MAC Address> was
AutoConnected more than once
The SPR was automatically connected to the
BSR using AutoConnect more than once. This
indicates that the SPR Ethernet MAC address
already exists in WipManage’s database, and
thus, the SPR was not successfully redirected.
<SPR’s Ethernet MAC address>
after redirect
The SPR was redirected.
<SPR’s Ethernet MAC address> is
not set for redirection
The SPR is configured for redirection, but
WipManage cannot locate the SPR’s Ethernet
MAC address in the database.
01040311-07 Airspan Networks Inc. 8-59