Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 403 / 580

C o m m i ssion ing M anu al C o n f i g u r i n g R ad i o T r an smi t P o w er
3.
a.
b.
c.
4.
5.
In the SPR group:
Select the Permit Power Management Mode check box.
Select the Power Management Mode Active check box.
On the BSR Receive Power ruler, move the slide ruler to the desired
received signal strength (e.g. –68 dBm ) that you want the BSR to obtain for
the SPRs (i.e. this is measured at the BSR).
In the BSR group, select the Power Management Mode Active check box.
Click Apply .
Figure 19-8: Multi Apply confirmation box
6. Select the Apply Changes to All SPRs and Apply Also BSR Device options,
and then click Apply .
Figure 19-9: Notice message box
7. Click Ok .
01040311-07 Airspan Networks Inc. 19-9