Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 305 / 580

C o m m i ssion ing M anu al C o n f i g u r i n g a R ep eat er S o l u t i o n
10.10. Task 8: Add Routes for SPRs behind
BSR-2 toward BSR-2
You now need to add static routing entries to allow SPR-1 to send traffic to SPR-2 ,
located behind BSR-2 . Therefore, the static route is defined by the IP address and
subnet of SPR-2 as well as the hop to reach this destination, which is via BSR-2 .
This is a static route of SPRs behind BSR-2 toward the IP address of BSR-2 (which
is on the same subnet as SPR-1 ). Therefore, these definitions are defined in SPR-1
(i.e. 10.1.2.1 ), in the SPR Zoom window.
To add routes for SPRs behind BSR-2 toward BSR-2:
In the SPR Zoom window for SPR-1 , from the Configuration menu, point to
Network , and then choose Static Routing Table . The Static Routing Table
dialog box appears.
1.
Figure 10-23: Static Routing Table dialog box
01040311-07 Airspan Networks Inc. 10-23