Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 31 / 580

C o m m i ssion ing M anu al I n t r o d u ct i o n
1.3.2. Subscriber Site
The ASWipLL subscriber site is located at the subscriber's premises. The ASWipLL
subscriber site consists of a radio transceiver that receives and transmits signals from
and to the Base Station. The radio transceiver provides the subscriber with high-
speed data access, Internet access, and VoIP at up to 4 Mbps. The ASWipLL radios
interface to the subscriber's Ethernet network either through a hub or switch, or
directly, depending on the ASWipLL radio model.
Note: For VoIP support, Airspan can provide a third-party residential gateway
(RGW). The RGW typically provides two POTS ports for telephony, a 10BaseT
LAN port for subscriber PC/network, and a 10BaseT port for connecting to the
SDA or IDR (depending on subscriber site configuration).
The ASWipLL system provides two different subscriber site configurations:
Outdoor radio with indoor Ethernet switch/hub
Indoor radio only
1.3.2.1. Outdoor Radio with Indoor Ethernet Switch/Hub
The outdoor radio with indoor Ethernet switch/hub configuration consists of the
ASWipLL Subscriber Premises Radio (SPR) and the ASWipLL Subscriber Data
Adapter (SDA), respectively. These two devices are described below:
Subscriber Premises Radio (SPR):
The SPR is the outdoor radio transceiver that provides a wireless link between
the subscriber’s network and the Base Station.
The SPR connects to the subscriber’s network through the ASWipLL SDA, an
Ethernet hub or switch (depending on SDA model). The SDA provides the SPR
with DC power, lightening protection, and Ethernet (10Base-T and/or 100Base-
T) interface to the subscriber’s PCs/network (up to four PCs depending on SDA
model). The SPR connects to the SDA by a standard CAT-5 cable.
The SPR is mounted outside, typically on an external wall or on a pole to
provide a clear line-of-site with the Base Station.
01040311-07 Airspan Networks Inc. 1-9