Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 323 / 580

C o m m i ssion ing M anu al D ef i n i n g S t at i c R o u t es
2. Click Add . The Static Routing Table - Add dialog box appears, as displayed
below.
Figure 12-4: Adding static route
3.
4.
Enter the following fields (as displayed in the figure above):
Destination : IP address of the destination network, e.g. 10.0.0.48 (i.e. IP
address of BSR to where you want to route the traffic.
Route Mask: subnet mask of the destination network. This can be calculated
using the Calc. button.
Next Hop: IP address of the router, e.g. 10.0.0.2 (i.e. IP address of third-
party router) through which the packet passes to reach its destination (i.e.
BSR). (When the next hop is one of the SPRs/IDRs in the cell, you can select
the
SPR check box, and then enter the SPR’s index number as defined in the
BSR.)
Primary Metric: number of hops between the BSR and the SPR/IDR or the
next router.
Click OK .
01040311-07 Airspan Networks Inc. 12-5