Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 569 / 580

C o m m i ssion ing M anu al E val u at i n g L i n k Q u al i t y
28.3.1.1. Accessing the Spectrum Analyzer
You can access the Spectrum Analyzer through either a serial or an IP network
communication mode.
To access the Spectrum Analyzer:
1.
2.
Start WipConfig and then connect WipConfig to the BSR by performing one of
the following:
Serial mode: on the toolbar, select the Serial option, and then click
Connect .
IP mode: on the toolbar, select the Network option, and then in the Remote
Agent field, enter the ASWipLL device's IP address, and then click
Connect .
In the Outlook bar, click the Spectrum Analyzer button; A message box
appears informing you that the device will lose connection with all other devices.
3.
1.
2.
Click OK .
28.3.1.2. Setting up the Spectrum Analyzer
Before you can start analyzing the spectrum, you need to define various parameters
in the Spectrum Analyzer.
To set up the Spectrum Analyzer:
Ensure the Setup tab (located in the top-right pane) is selected.
In the Refresh Rate field, enter the rate (in seconds) for polling the BSR/PPR.
(The default is 3 sec; maximum is 3600 sec.)
01040311-07 Airspan Networks Inc. 28-7