Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 279 / 580

C o m m i s si o n i n g M a n u al C o n f i g u r i n g a P o i n t - t o - P o i n t R a d i o L i n k
8.
9.
In the Eth Subnet Mask field, enter the SPR's subnet mask address (e.g.
255.255.255.240 ) so that it is in the same subnet as the PPR.
In the RF
Configuration group, in the BSR Air MAC Address , enter the PPR’s
Air MAC address to which the SPR is associated, e.g. 0x1200 . Valid ranges are
from 0x0000 to 0xFFFF.
Note: For the Air MAC address, Airspan recommends using only the most
significant bytes (MSB), e.g. the two left-most bytes, and not the least
significant bytes (LSB), e.g. the right-most bytes. For example, a typical Air
MAC address would be "AB00", where the zeros represent the LSB.
10. Click the PPR button.
The Index in BSR field displays the SPR's index number associated with the
PPR. This index number is calculated using an algorithm based on the PPR's Air
MAC address that you entered in the
BSR Air MAC Address field (e.g. Air
MAC address is 0x1200, therefore, the SPR’s index is 126 ).
11. On the toolbar, click the Write button.
On
the toolbar, click the Reset button to reset the SPR. 12.
A Warning message box appears, requesting you to confirm device reset.
Figure 9-12: Warning message box for resetting device
13. Click Yes to reset the device with default settings.
01040311-07 Airspan Networks Inc. 9-13