Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 81 / 580

C o m m i ssion ing M anu al I n i t i al C o n f i g u r at i o n
6. In the RF Configuration group, enter the following fields:
Air MAC Address : BSR’s Air MAC address (valid ranges is between
0x0000 through 0xFFFF), e.g. 0x1200 .
Notes:
1) For the Air MAC address, Airspan recommends using only the most
significant bytes (MSB), i.e. the
two left-most bytes , and not the least
significant bytes (LSB), i.e. the right-most bytes. For example, a typical Air
MAC address would be "AB00", where the zeros represent the LSB.
2) To ensure that each BSR has a unique Air MAC address, ensure that the
two left-most significant bytes are different between BSRs, e.g.
10 00 and 20 00.
In this way, the ASWipLL system can support 256 different BSRs in the same
sector (or area).
Frequency Table ID : frequency table ID used by the BSR (valid range is 0
through 63), e.g. 1 .
Note: Frequency table IDs 0 through 31 are read-only (i.e. in ROM);
Frequency table IDs 32 through 63 (i.e. NVRAM). To define NVRAM frequency
tables, refer to the
WipManage User’s Guide .
7.
On
the toolbar, click the Write button.
On
the toolbar, click the Reset button to reset the BSR. 8.
A Warning message box appears, requesting you to confirm device reset.
Figure 3-12: Warning message box for resetting device
9. Click Yes to reset the device.
01040311-07 Airspan Networks Inc. 3-15