Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 253 / 580

C o m m i ssion ing M anu al E st ab l i sh i n g B S R - S P R L i n k w i t h Au t o C o n n ect
The Add Range Permitted SPRs dialog box appears.
Figure 8-40: Add Range Permitted SPRs dialog box
2.
3.
4.
5.
6.
7.
In the First SPR Index field, enter the index number of the first SPR
(e.g. 2 )
In the Last SPR Index field, enter the index number of the last SPR
(e.g. 3) .
In the First SPR IP Address field, enter the IP address of the first SPR (e.g.
10.0.0.12 ).
From the Status drop-down list, select AutoConnect .
From the Auto Disconnect drop-down list, select On to enable this feature.
Select the Add to Static Route Table check box, and then in the Subnet Mask
field, enter Subnet Mask address.
Note: If the SPRs are in transparent bridge mode, clear the Add to Static
Route Table check box.
01040311-07 Airspan Networks Inc. 8-47