Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 275 / 580

C o m m i s si o n i n g M a n u al C o n f i g u r i n g a P o i n t - t o - P o i n t R a d i o L i n k
8.
9.
10.
In the Eth Subnet Mask field, enter the PPR's subnet mask address (e.g.
255.255.255.240 ).
In the RF
Configuration group, in the BSR Air MAC Address , enter the PPR's
Air MAC, e.g. 0x1200 . Valid ranges are from 0x0000 to 0xFFFF.
To define a point-to-point radio link with an SPR, click the PPR Configuration
button. The PPR Configuration dialog box appears, as displayed below.
Figure 9-7: PPR Configuration dialog box
Notes:
1)
The PPR Configuration button only appears in WipConfig if the device to
which WipConfig connects is a PPR.
2) The
SPR Index field is read-only. WipConfig automatically calculates the
SPR index number by using an algorithm based on PPR's Air MAC address
(e.g. 0x1200 results in SPR index #
126 ).
a.
b.
c.
11.
In the IP Address field, enter the SPR's IP address (e.g. 10.0.0.20 ) with
which the PPR will create a point-to-point radio link.
In the Subnet Mask field, enter the subnet mask address of the SPR (e.g.
255.255.255.240 ) with which the PPR will create a point-to-point radio link.
Click Accept .
On the toolbar, click the Write button.
01040311-07 Airspan Networks Inc. 9-9