Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 109 / 580

C o m m i ssion ing M anu al E st ab l i sh i n g B S R - S P R L i n k i n R o u t er M o d e
6.
a.
Apply factory default settings by performing the following:
On the toolbar, click the Set Factory Default button.
A Warning message box appears.
Figure 4-9: Warning message box for setting defaults
b. Click Yes to confirm applying factory defaults to the device.
A Warning message box appears, requesting you to confirm device reset.
Figure 4-10: Warning message box for resetting device
c.
7.
Click Yes to reset the device with default settings.
From the Mode drop-down list, select Router (i.e. IP router mode).
Note: If in the SPR’s ROM, the SPR is defined as an IP router, then the Mode
field displays Router; If the SPR’s ROM is defined for transparent bridging,
then the Mode field displays Bridge.
8.
9.
In the Eth IP Address field, enter the SPR’s IP address (e.g. 10.0.0.20) .
In the Eth Subnet Mask field, enter the SPR’s subnet mask address (e.g.
255.255.255.240 ).
01040311-07 Airspan Networks Inc. 4-11