Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 189 / 580

C o m m i ssion ing M anu al C h an g i n g L i n k f r o m B r i d g e t o R o u t er
Figure 7-5: Warning message box for setting defaults
b. Click Yes to confirm applying factory defaults to the device.
A Warning message box appears, requesting you to confirm device reset.
Figure 7-6: Warning message box for resetting device
c. Click Yes to reset the device with default settings.
Note: If in the BSR’s ROM, the BSR is defined as an IP router, the Mode field
displays Router ; If the BSR is defined for transparent bridging, then the Mode
field displays Bridge.
6.
7.
8.
9.
10.
11.
From the Mode drop-down list, select Router .
In the Eth IP Address field, enter the BSR’s IP address (e.g. 10.0.0.10 ).
In the Eth Subnet Mask field, change the BSR’s subnet mask address (e.g.
255.255.255.240 ).
In the Air MAC Address field, enter the BSR’s Air MAC address, e.g. 0x1200 .
Valid ranges are from 0x0000 through 0xFFFF.
In the Frequency Table ID field, enter frequency table ID used by the BSR
(valid range = 0 through 63), e.g. 1 .
On the toolbar, click the Write button.
01040311-07 Airspan Networks Inc. 7-7