Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 106 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
96
12
PRESSURE REGULATOR
Pressure regulator with bypass regulation is by far the most suitable for trailed sprayers,
because of better response time of distribution valves when spraying.
Bypass regulation has its regulation part separated from distribution valves. Regulation part is
located closer to the pump, suction and pressure collector, while the distribution valve is
located closer to the nozzle, so the response time of the distribution valve can be better/ is as
big as it can be.
Besides the separation of regulation and distribution valve, “main” valve was also canceled.
This function has taken the bypass valve. The function of the bypass valve in this system is
the opposite of the “main” valve. When you want to change the current, you open the bypass
valve, at the same time, all the distribution valves close (in manual or in automatic mode).
With this we accomplish a constant circulation of the crop protection liquid through the whole
system and with that we prevent sedimentation of crop protection liquid in the pressure
regulator.
12.1 Pressure regulator parts
Pressure regulation in bypass version is composed of two parts:
1- Regulation valve with filter
2- Section valves EC-06
Figure 57 REGULATION VALVE WITH FILTER
Figure 58 SECTION VALVES EC-06