Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 84 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
74

Distance:
Distance can also be input by measuring the distance beforehand. Drive the distance with tractor and
input it in AG-TRONIK.
To do this, follow this procedure:
Move the tractor to the start of the measured distance. Stop the tractor and choose line DISTANCE in
menu SPEED CONSTANT. Press key to open the window :
Figure 38 Figure 39
Display shows current value of imp/km (in our case 955), impulses (0) and actual travelled distance (0
km). Press button and value 1000 starts flashing. Start driving and impulse counting begins next
to word IMPULSES. When the distance is travelled, stop and number of impulses, performed on the
path, is displayed next to line IMPULSES. In our case, the value is 506 imp. Use buttons and
to set previously measured value. In our case, the value is 515 m. Use button to confirm
entry. New value of imp/km is displayed. In our case, value of imp/km is 982.
If you have finished with entries, press buttons to return to menu "SPEED
CONSTANT".