Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 78 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
68
no suitable cable connection between AG-TRONIK and GPS device or the GPS device is not
functioning properly or there are not enough satellite signals for operation.
If the symbol is not flashing, connection between AG-TRONIK and GPS device
functions perfectly and devices communicate with each other.
Meaning of MANUAL, AUTO:
If the connection between AG-TRONIK and GPS device is in MANUAL protocol, this means
that sprayer operation can be automatic or manual, and GPS device only records work.
If the connection between AG-TRONIK and GPS device is in AUTO protocol, this means
that GPS device is in control of automatic operation of AG-TRONIK.
11.7.5 Flow constant
Flow constant is the number of impulses (imp/l), which the flow sensor gives to AG-
TRONIK, when 1 liter of fluid flows through it. The constant changes, when the density of
the fluid (chemical) changes or by substantial change of flow through the sensor. Sensors are
factory set to nominal flow and the value is entered on the flow sensor. The constant must be
checked and corrected occasionally. How a new constant is measured and entered is described
in different sub-chapters: NEW CONSTANT, KNOWN FLOW and CORRECTION. Known
flow means that the constant is known and just needs to be entered. Known flow and
correction are measurements. Here, constants are measured and entered. According to length
of measurement or precision, the KNOWN FLOW is differentiated from CORRECTION.
With known flow, the measurement lasts 30 seconds, with CORRECTION, the time of
measurement is the time of emptying one tank.
To enter window »FLOW CONSTANT«, select icon
and confirm it with
confirmation button The display shows:
This window offer three options:

New constant,

Known flow,

Correction;
With key and move the selection window and choose the way of changing flow
constant.
Press key to open a separate window.