Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 95 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
85
Press confirmation button to activate analysis. Briefly, ANALYSIS IN PROGRESS is
displayed under the bottom line.

Continue work:
If you have changed nozzle and/or type of chemical and/or chosen another nozzle type or just
continued work on the same lot after a few days, without conducting analysis on other lots, all
data does not need to be input in AG-TRONIK; they can be changed, if required. When
inputting “new work”, you do not need to input entire parameters, you can only change them.
“Continue work” begins with the same window as for “new work”:
Select frame with mark "X" and confirm selection with confirmation button . Window
for nozzle selection is displayed, where you select nozzle and its size. When you continue
work, it is therefore not necessary to input lot name, as it is already selected. Review and
eventually change other spraying parameters. Procedure for selection and confirmation of
nozzles, cultures, spray is the same as in subchapter "new work".

Cancel/end work:
When you wish to cancel or end specific work or analysis, go to the basic window for start or
end of analysis, and choose field CANCEL/END.
Press confirmation key to open the next window: