Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 110 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
100
Figure 62 SPEED SENSOR
12.3.4 Pressure sensor - option
Instead of measuring flow with flow gauge, flow
can be indirectly measured with pressure sensor.
Pressure sensor is installed in pressure gauge
position. Measuring and readout of pressure are
shown on basic image of display of AG-TRONIK.
Pressure sensor indirectly measure flow according
to nozzle flow. Measuring flow with pressure
sensor is described in detail chapter “GENERAL
SETTING, Flow measuring protocol”.
12.3.5 Pressure gauge
Figure 61 PRESSURE GAUGE
As standard, pressure regulator is fitted with
pressure gauge with diameter of 100 mm,
class 1.6., double stage, where first stage is in
area 0-8 bar, coloured green, and second
stage in area 8-20 bar, coloured yellow or
red. Pressure gauge is filled with glycerine,
which stabilizes the indicator. During winter
time, it is recommended to unscrew pressure
gauge and store it in a warm place, if the
sprayer is exposed to temperatures below
freezing point.
12.3.6 Speed sensor
Speed measurement, if performed through induction no-
contact sensor. On driven sprayers, the sensor is installed on
rear right wheel axle (figure 114). On carried sprayers, it is
installed on tractor housing and measures passages of wheel
nuts. Type of no-contact sensor for AG-TRONIK 14 is code
NPN: 917006-05.
Distance of sensor from mark is
also important, which should be
between 3 and 5 mm.
Figure 60 PRESSURE SENSOR