Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 76 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
66
11.7.2 Filling of tank
With the window “FILLING OF TANK” you basically set the content of chemical, which you
have prepared in the tank. By setting the value you are basically setting the quantity of
chemical on the liter scale of AG-TRONIK. In program “FLOW ANALYSIS”, AG-TRONIK
then counts down the used chemical during spraying and shows current quantity of remaining
chemical in the tank.
To enter window "TANK FILLING", select icon and confirm it with confirmation
button . The display shows:
In the line “VOLUME OF CHEMICAL IN TANK” AG-TRONIK offers the last set value and
in case that you prepared the same quantity, press key and value in the frame
starts to blink. By pressing the key again, you confirm quantity, counter
“currently” simultaneously sets “current” quantity of chemical to set value.
If you have prepared a greater or smaller quantity, press key and the value in the
frame starts to blink.
With setting key or
set new value and “transfer” it to window “currently” by
pressing the key .
If the values are not confirmed or set before the start of spraying, AG-TRONIK litre scale
does not function (AG-TRONIK is not instructed that the tank was filled).