Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 96 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
86
If you have chosen not to cancel the analysis, simply choose NO and return to the previous window.
If you select " " and confirm with confirmation button , new window is displayed:
In window, AG-TRONIK asks if you wish to write analysis to SD memory card. If you select "X", the
analysis is not saved and analysis data is lost.
If selecting " ", spraying data is written on SD memory card. During writing, WRITE OK is shown
briefly on the display under the line.
If you do not have a SD memory card in AG-TRONIK, DRIVE ERROR displays briefly under bottom
line. Insert memory card and repeat writing procedure.
If analysis is deactivated, and you have accidentally wanted to turn off analysis, ANALYSIS NOT
STARTED is displayed briefly.
If you have finished work and want to turn off AG-TRONIK, but analysis is still on, AG-TRONIK
warns you that analysis is in progress and that work cannot be turned off, until you complete analysis.
When you press button , ANALYSIS IN PROGRESS is shown briefly on the display. In this
case, analysis must be stopped. Select basic image "WORK", select line PAUSE/END and press
confirmation button to end analysis.

Rename:
This part of program is intended for renaming already input lots. If you wish to rename a lot,
move selection frame to line RENAME. Press confirmation button to open new
window: