Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 97 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
87
Move selection frame to name, which you want to rename, and press confirmation button
to open window:
Renaming is the same as name input in chapter "new work". Select individual letters from the
list of letters below. Move around the alphabet with buttons and
confirm with button . If you have made a mistake, you can delete a letter or group of
letter by selecting "Del". When you have input lot name, confirm it with "Ent". You return to
basic image "WORK".

Deleting:
This part of program is intended for deleting existing lots. If you wish to delete a lot, move
selection frame to line DELETE . Press button to delete selected name. Press button
to return to basic menu "WORK".
11.8.4 Analysis
In window ANALYSIS, display shows current data or spraying parameters, which are
achieved during spraying. Data is calculated under the condition that:
Analysis is activated.
Required information is input in window "WORK".
If the constants in program PROGRAMMING are input correctly and you are spraying,
analysis displays data, which is important for spraying.
Enter window "ANALYSIS" by selecting icon and confirming it with confirmation
button . The display shows:
Under the title ANALYSIS, word RUN or OFF also appears and it describes status of
analysis. If analysis is activated, RUN is shown next to ANALYSIS. If analysis is
deactivated, word OFF is displayed.