Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 91 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
81
In menu “WORK”, start and end of analyses are defined, but also the following can be
entered:

Lot name

Nozzle size

Nozzle type

Culture

Chemical 1

Chemical 2

Chemical 3

Chemical 4
AG-TRONIK collects and calculates all other parameters. Let us take a look at other
parameters, which are a part of analysis. In column 3 of the table below, some parameters are
described in greater detail:
Lot name: LOT 1 Lot name, one lot has one name
NOZZLE: 120-04 RED Nozzle size
NOZZLE TYPE: LU / ST
CULTURE: WHEAT
CHEMICAL 1: FALCON
CHEMICAL 2:
CHEMICAL 3:
CHEMICAL 4:
START: 22/03/2010 8:48.17 Start of work/analysis
STOP: 22/03/2010 17:49.55 End of work/analysis
XXXXXXXX: In case of manual control, MANUAL is displayed
AUTOMATIC: Used spraying control
Time of work: 9:01.38
Total time, gross, drive, filling…
Travelled distance (km): 57.562km
Total travelled kilometres, gross, including
transport to the field…
Spraying time : 4:02.38
Net spraying time, time when the spraying was
executed
Set consumption (l/ha): 200 Set/given consumption
Average consumption (l/ha): 198 Achieved consumption
Chemicals consumption (l): 12,046 Actual chemicals consumption
Sprayed (ha): 60,840 Actual sprayed area
Spraying distance (km): 33,800 Distance/path, which was done in spraying time
Max. speed (km/h): 10.6 Max. Achieved speed in spraying time
Avg. speed (km/h): 8.4 Average spraying speed
Avg. flow (l/min): 50.4 Average flow in spraying time
Efficiency (ha/h): 15.2 Actual efficiency
Max. efficiency (ha/h): 17.1 Maximum efficiency in spraying time
Flow constant (imp/l): 684 Flow constant