Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 57 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
47
10.7.4 Hydraulic levelling
Levelling cylinder is fastened between the swing frame holder and parallelogram fastening.
Response of levelling cylinder is set with choke. Hydraulic levelling can set balance position of
spraying equipment (horizontal position), as well as parallelism of equipment to the ground in
case of sloping terrain. Position of spraying equipment changes according to position of top part
of oscillating parallelogram.
Hydraulic levelling can greatly influence linear distribution of crop protection liquid on the
surface and quality of spraying. This makes the system very suitable on rough or sloping terrain.
Levelling cylinder response is set with chokes.
10.7.5 Hydraulic cylinders setting
Hydraulic cylinders on the spraying equipment are fitted with a choke bolt, which control
cylinder’s response.
Set it by first unscrewing the nut (2) and set the cylinder with bolt (1). Then, screw the nut
back.
1
2
Figure 37: CHOKE BOLT
Figure 36: HYD. LEVELLING CYLINDER
Choke
bolt