Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 31 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
21
7
DETAILED DESCRIPTION OF SPRAYER COMPONENTS
Sprayer chassis is of welded steel construction with a fixed tank and, in the front part, BM
pump, centrifugal pump, pressure filter and tank level indicator. On the left part of the sprayer
are valves for sprayer control, suction filter, filling container with parallelogram and tank for
washing hands. Spraying equipment is fixed in the back, on the lifting mechanism with
hydraulic control. Tank for rinsing is installed next to the main tank.
Component parts of the sprayer are described in the chapter “MACHINE DESCRIPTION”,
subchapter “SPRAYER COMPONENT PARTS”.
7.1 Sprayer chassis
Made out of welded steel construction. All parts of the sprayer are corrosion protected and
powder coated or zinced.
7.2 Adjustable track
Sprayer is fitted with two semi-axles, which can, by unscrewing bolts (marked with arrow in
figure 5), be adjusted perpendicularly to driving direction. Width of semi-axle is adjusted the
same as the width of tractor wheels, to drive over the smallest amount of crops. Width of
semi-axle and turning of wheels enable adjustment of width between 1500-2200 mm.
WARNING: Be careful, when setting track, that all four (4) bolts press on the
semi-axle.
7.3 Main tank
The tank is made of chemically resistant polyethylene, with rounded edges and smooth
interior and exterior surface, which enables efficient cleaning. Tank bottom is tilted to ensure
complete discharge. Top side of the tank is fitted with a cover with inserted strainer. When
filling the tank with crop protection liquid or water, do not remove the strainer! On the front
side of the base is the tank level indicator, and, for easier control of amount of chemical agent
in the tank, there is transparent tube next to the tank level indicator, in which there is a red PE
ball.
Figure 5: ADJUSTABLE TRACK