Agilent Technologies G7104A, Руководство пользователя

Страница: 212 / 234

212 Agilent 1290 Infinity II Flexible Pump User Manual
11
LAN Configuration
Manual Configuration
With Telnet
Whenever a TCP/IP connection to the module is possible (TCP/IP
parameters set by any method), the parameters may be altered by opening
a Telnet session.
1 Open the system (DOS) prompt window by clicking on Windows START
button and select “Run...” . Type “cmd” and press OK.
2 Type the following at the system (DOS) prompt:
•
c:\>telnet <IP address>
or
•
c:\>telnet <host name>
Figure 38 Telnet - Starting a session
where <IP address> may be the assigned address from a Bootp cycle, a
configuration session with the Handheld Controller, or the default IP
address (see
“Configuration Switch” on page 192).
When the connection was established successfully, the module responds
with the following:
Figure 39 A connection to the module is made