Agilent Technologies G7104A, Руководство пользователя

Страница: 205 / 234

Agilent 1290 Infinity II Flexible Pump User Manual 205
LAN Configuration
11
Automatic configuration with Bootp
Two Methods to Determine the MAC Address
Enabling logging to discover the MAC address using BootP
If you want to see the MAC address, select the
Do you want to log BootP
requests?
check box.
1 Open BootP Settings from Start > All Programs > Agilent BootP Service >
EditBootPSettings .
2
In
BootP Settings...
check
Do you want to log BootP requests?
to enable logging.
Figure 33 Enable BootP logging
The log file is located in
C:\Documents and Settings\All Users\Application Data\Agilent\BootP\LogFile
It contains a MAC address entry for each device that requests
configuration information from BootP.
3
Click
OK
to save the values or
Cancel
to discard them. The editing ends.
4
After each modification of the BootP settings (i.e.
EditBootPSettings
) a
stop or start of the BootP service is required for the BootP service to
accept changes. See
“Stopping the Agilent BootP Service” on page 209
or “Restarting the Agilent BootP Service” on page 210.
5
Uncheck the
Do you want to log BootP requests?
box after configuring
instruments; otherwise, the log file will quickly fill up disk space.