Agilent Technologies AssayMAP Bravo, Руководство по установке

Страница: 14 / 114

Installing the platform
Installing the Bravo risers
6 AssayMAP Bravo Platform Installation Guide
2
Ensure that the head mount is resting against the Bravo back plate. With a
person positioned on each side of the Bravo Platform, slowly tilt the device
backwards until the back plate rests on the foam.
3
Remove the four rubber feet from the base of the Bravo deck.
Figure Bottom view of Bravo deck
4
On the bottom of the Bravo deck, install the two risers, one on each side.
Use the four screws and washers provided to install each riser. Tighten the
screws as follows:
a
Tighten the screws at the top first, and then tighten the screws at the
bottom, as the following figures show.
b
Tighten the screws until snug, and ensure that the risers are flush to
the base of the Bravo deck.
Figure Top screw located at inner hole