Agilent Technologies 34970A, Руководство пользователя, Страница: 296 / 356

296
Chapter 7 Tutorial
Measurement Fundamentals
Strain Sensors The metal foil resistance strain gage is by far the most
widely used strain measurement sensor. It consists of a thin metallic foil
grid bonded to a thin insulating, adhesive backing. The resistance of the
foil varies linearly with strain. Strain in the test body is simply the ratio
of the foil’s strained to unstrained resistance:
 =  R / R.
The Gage Factor (GF) indicates the sensitivity of a strain gage and is a
measure of the fractional resistance change per strain: GF = (  R / R) /  .
Devices with a higher gage factor will exhibit a greater resistance change
per strain applied.
Strain gages are available in many patterns with various numbers and
configurations of elements. The most common element is the single gage
form shown below. Multi-element strain gages, also called
rosettes , are
used to measure components of strain in different directions. Two-
element (90°) and three-element (45° or 60°) configurations are the
most common.
Common Uses for Strain Gages Strain gages are used to sense many
types of physical parameters. Strain gages are primarily a force-sensing
device. Force is measured indirectly by measuring the deformation of a
test body to a known applied force thus producing a resistance change
proportional to the applied force. Many other physical quantities can be
measured through force measurements. Common applications of strain
gages include weight, pressure, flow, and level measurements.
HI Source
HI Sense
LO Sense
LO Source
34970A Refresh UG.book Page 296 Wednesday, February 17, 2010 12:34 PM