Agilent Technologies 34970A Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 356

Agilent Technologies 34970A Скачать руководство пользователя страница 140

140

Chapter 4 Features and Functions

Alarm Limits

• You can assign an alarm to any configured channel and multiple

channels can be assigned to the same alarm number. However, you
cannot assign alarms on a specific channel to more than one alarm
number.

• When an alarm occurs, the instrument stores relevant information

about the alarm in the queue. This includes the reading that caused
the alarm, the time of day and date of the alarm, and the channel
number on which the alarm occurred. The information stored in the
alarm queue is always in absolute time format and is not affected by
the

FORMat:READing:TIME:TYPE

command setting.

• You must configure the channel (function, transducer type, etc.)

before setting any alarm limits. If you change the measurement
configuration, alarms are turned off and the limit values are cleared.
Alarms are also turned off when you change the temperature probe
type, temperature units, or disable the internal DMM.

• If you plan to use alarms on a channel which will also use scaling,

be

sure to configure the scaling values first

. If you attempt to assign the

alarm limits first, the instrument will turn off alarms and clear the
limit values when you enable scaling on that channel. If you specify a
custom measurement label with scaling, it is automatically used
when alarms are logged on that channel.

• If you remove a channel from the scan list (by selecting

CHANNEL OFF

from the front panel or by redefining the scan list

from the remote interface), alarms are no longer evaluated on that
channel (during a scan) but the limit values

are not

cleared. If you

decide to add that channel back to the scan list (without changing the
function), the original limit values are restored and alarms are
turned back on. This makes it easy to temporarily remove a channel
from the scan list without entering the alarm values again.

• Each time you start a new scan, the instrument clears all readings

(including alarm data) stored in reading memory from the previous
scan. Therefore, the contents of reading memory are always from the
most recent scan.

34970A Refresh UG.book Page 140 Wednesday, February 17, 2010 12:34 PM

«
...
138
139
140
141
142
...
»

Содержание 34970A





































































































































































































































































































































































Отзывы:

Нет отзывов