Agilent Technologies 34970A Скачать руководство пользователя страница 124

Страница: 124 / 356

124

Chapter 4 Features and Functions

Temperature Measurement Configuration

Thermocouple Measurements

To connect a thermocouple to the module’s screw terminals, see page 28.

• The instrument supports the following thermocouple types:

B, E, J, K, N, R, S, and T using ITS-90 software conversions.

The default is a J-Type thermocouple.

• Thermocouple measurements require a reference junction

temperature. For the reference junction temperature, you can use an

internal measurement on the module, an external thermistor or RTD

measurement, or a known fixed junction temperature.

• If you select an external reference, the instrument automatically

reserves channel 01 on the multiplexer in the

lowest

slot as the

reference channel (thermistor or RTD measurement). If you have

more than one multiplexer installed, channel 01 on the module in the

lowest slot is used as the reference for the entire instrument.

• Before configuring a thermocouple channel with an external

reference, you must configure the reference channel (channel 01) for a

thermistor or RTD measurement. An error is generated if you

attempt to select the external reference source before configuring the

reference channel. An error is also generated if you change the

function on the reference channel after selecting the external

reference for a thermocouple channel.

• If you select a fixed reference temperature, specify a value between

-20 °C and +80 °C (always specify the temperature in °C regardless of

the temperature units currently selected).

• The accuracy of the measurement is highly dependent upon the

thermocouple connections and the type of reference junction used.

Use a fixed temperature reference for the highest accuracy

measurements. The internal isothermal block reference provides the

lowest accuracy measurements. For more information on reference

junction temperature measurements and associated errors, see the

sections on pages 267 and 274.

34970A Refresh UG.book Page 124 Wednesday, February 17, 2010 12:34 PM

Содержание 34970A





































































































































































































































































































































































Результаты поиска

Содержание 34970A

Отзывы:

Agilent Technologies 34970A, Руководство пользователя, Страница: 124 / 356

Результаты поиска

Содержание 34970A

Отзывы: