Agilent Technologies 34970A Скачать руководство пользователя страница 232

Страница: 232 / 356

232

Chapter 5 Error Messages

Instrument Errors

459

Logging to USB was stopped

Data logging was stopped prior to completion due to an abort or some

other error condition.

460

Logging to USB was stopped after 2^32 sweeps of data

Instrument is only able to capture 2^32 (~4.3 billion) sweeps worth of

data on an external USB drive

461

Memory lost: non-volatile settings; USB drive

Data in non-volatile memory was lost or corrupted. USB logging enable,

row limit and column separator will be set to defaults.

462

Configuration import aborted

Reconfiguration of the instrument was aborted.

463

Configuration import failed

This is a summary error that will be generated if ANY other errors were

reported during configuration import.

464

Invalid import file

The instrument did not recognize the USB configuration import file.

465

Import file cardset does not match instrument

The current instrument configuration does not match the cardset

expected by the USB import file.

466

Operation not allowed in a configuration import file

An illegal command was used inside the USB import file.

467

No readings to export

Reading memory is empty; nothing was exported to the USB drive.

468

Unable to fetch measurement config from internal processor

The instrument was unable to fetch measurement configuration data

from the secondary processor due to a communications error.

469

Internal processor returned an invalid measurement config

Configuration data returned by secondary processor was bad.

Measurement configuration could not be determined.

34970A Refresh UG.book Page 232 Wednesday, February 17, 2010 12:34 PM

Содержание 34970A





































































































































































































































































































































































Результаты поиска

Содержание 34970A

Отзывы:

Agilent Technologies 34970A, Руководство пользователя, Страница: 232 / 356

Результаты поиска

Содержание 34970A

Отзывы: