Advanced Flight Systems AF-5400, Руководство пилота

Страница: 32 / 126

Version 15.0
AF-5000 Series Pilot Guide
32
Clock/Timer Operation
The system time is automatically set by
GPS. The unit will set Zulu time
automatically when GPS signal is acquired.
Clock Setting
Touch the Time or press the [TIMER] button to
enter the date/time adjustment menu. Press the
[OFFSET] button to enter the Time Zone offset
from UTC time (i.e. Pacific Standard Time is -7
UTC). Clock Format can be changed to 12-
hour, 24-hour or Zulu format in the TIMER
menu by pressing [CLK:12H], [CLK:24H], or
[CLK:Z].
Timer Menu Functions
The system has a count-down and count-up timer.
Once the timer is activated it is displayed on the
upper left corner of the screen, under the clock.
ON/OFF Turns ON and OFF the Timer
UP/DOWN Selects UP or DOWN Timer
RESET Resets the Timer
START/STOP Starts the Timer or Stops the Timer
CLOCK MODE AM/PM, 24H, Zulu
NET SYNC Forces all screens to the same time
OFFSET Sets the Zulu offset
SEC Adjusts the timer seconds
MIN Adjusts the timer minutes
The Up or Down mode is displayed with an arrow on the screen.
The timer display will flash green when 0:00 is reached and
the voice alert “TIMER”
will sound. The timer will also start counting in the negative, indicated elapsed time
expired. The RESET button acts differently based on Timer mode. In Count Down
mode, the RESET button will reset the time to the last programmed time. In Count Up
mode, the RESET button will change the timer to 0:00.
Dual Screen Clock Setting
The current time on another non AF-5000 EFIS screen can be set by pressing the [NET SYNC] button
from the timer menu on the current display. When the [NET SYNC] button is pressed, the time is sent
over the Ethernet connection to the other screen and its clock is set to match the current screen.