ADB EURODIM TWIN TECH, Руководство по установке

Страница: 125 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 23
Issue 1.1
Module identification
All the modules are fitted with an EEPROM cue, which contains an ID code. When the modules are
installed in the cabinet, this ID is communicated to the controller.
This information is available in the "Present" column.
In this column, the following information can be obtained: a correct ID or "Undefined slot" for a
module that is unidentified by the controller or uninstalled.
EURODIM TWIN TECH module identification table
In the Reference column, we are given the type of module that will actually be used by the
controller to control the circuits. This reference may be modified manually. If a position in the
cabinet is not used, the user must fill it in as an "undefined slot".
Use the wheel to view the ID of each module.
17.1 COMPARE Key
This function is used to compare the ID given in the PRESENT column and the ID given in the
REFERENCE column, for each module. This is used to check that the content of the references is
up-to-date with respect to the modules actually installed.
TD4x3/MN/1R
T
ECHNOLOGY:
S (sinewave - standard with diagnostics only with 3R or 4R)
T (thyristor dimmer with 400µs rise time)
P (thyristor dimmer with 200µs rise time)
F (Fluo dimmer with 200µs and remote controlled preheat)
R (DimSwitch with 200µs rise time)
H(DimSwitch with dual 200µs/400µs rise time-standard
with diagnostics)
N (Non-Dim no remote control)
D (Full diagnostic version - optional)
Number of circuits in the module
Rated Load in kW of each circuit in the module
MN (MCB with 1P+N protection)
RCD protection: No RCD
1R (per module)
2R (2 individual protections - Fluo)
3R (3 individual protections)
4R (4 individual protections)