ADB EURODIM TWIN TECH, Руководство по установке

Страница: 141 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 39
Issue 1.1

the output control duration, delay row, duration between 0 ( ~ 0.5 secs) and 60 secs
Touch the screen or use the wheel to select either the manual or automated test.
Manual test: only the selected output associated with a reference module will be controlled with the
set intensity.
Automated test: all outputs starting from the selected output will be tested one after the other for
the duration and with the set intensity except the channels defined as
“undefined slot” or “Empty
slot”.
Press the "START" key to launch the manual or automated cycle.
Press the same "START" key to stop the manual or automated cycle.
27.2 Flash Tab
Touch to select the Flash tab.
Used to control a circuit with automated variation of the intensity between 0 and the set value.
To select an output, position on the output number (highlighted), either by touching the screen or
using the wheel.
To edit the output number:

Touch the screen to select the output number or use the wheel,

Type the number using the keyboard,

Validate the output by touching the screen to select the zone in question, or using the
wheel.
Otherwise, press keyboard key 1 (or the + key on the screen) to increment the output number or
press keyboard key 0 (or the - key on the screen) to decrement the output number.
According to the output function selected, the - value of corresponding patches A and B is
displayed.
Adjust, in the same manner:

the output control intensity, value row, intensity between 0 and 100% (FF)

the output control duration, delay row, duration between 0 ( ~ 0.5 secs) and 60 secs
Touch the screen or use the wheel to select either the manual or automated test.
Manual test: only the selected output will be controlled with automated variation of the intensity.
Automated test: all outputs starting from the selected output will be tested one after the other
throughout the duration and with variation of the intensity except the channels defined as
“undefined slot” or “Empty slot”.
Press the "START" key to launch the manual or automated cycle.
Press the same "START" key to stop the manual or automated cycle.
28. Load/Save Menu
This function is used to save or load the parameters of the cabinet, such as patch A & B, the
multiplying factor, the laws and the power configuration. Furthermore, it is possible to choose to
save the 80+1 cues upon confirmation.