ADB EURODIM TWIN TECH, Руководство по установке

Страница: 91 / 166

www.adblighting.com Quick Start - page 25
Issue 1.0
11. Patch Menu
This function is used to configure a patch on a circuit or set of circuits for the DMX A and
DMX B signal.
This configuration enables the user to attribute the value of a DMX A and DMX B signal
channel to the control of one of the cabinet‟s circuits.
Reminder
The referencing of the modules in the cabinet starts at 1 in relation to the first location
located at the top of the cabinet, up to 32.
The left-hand column contains the referencing of the modules and circuits present in the
cabinet.
The figure in the right-hand column is the channel attributed in the DMX signal.
Select patch A or B to start with
Use the wheel to rapidly move between all the rows of the patch. The row selected is
highlighted.
To attribute a channel, position on a row and use:

The touch-screen and the numeric keyboard to enter a value,

Press key 1 directly to increment the value by 1 (between 1 and 512) in relation to
the first value available on a previous row,

Press key 0 directly to decrement the value by 1 (between 1 and 512) in relation to
the first value available on a previous row,

The Range key in order to enter values between two circuit references.
DMX
channel
Module
reference