ADB EURODIM TWIN TECH, Руководство по установке

Страница: 149 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 47
Issue 1.1
32.2 Range Key
Used to select a set of circuits to be scanned, included within a range.
Important note : the FLUO, Non Dim and sinewave modules and those circuits that apply the
switch law will not be selected.
Enter:

The start dimmer number (From dim),

The end dimmer number (To dim),

Confirm with the OK button.
Note : the circuit's first number ("From dim") must be < t
he circuit‟s second number ("To dim")
during definition of the range. Otherwise, the range between two circuits cannot be
validated.
The ALL key is used in order to directly select the 128 circuits of the cabinet.
32.3 Scanning the Outputs
Launch the scan by pressing the "SCAN" key. Confirm your choice.
Several stages are conducted during the scan of a circuit‟s output and which can be viewed on the
status row:

Test at 14% (of 230V) in order to detect the presence of a short circuit
(Stopping of the procedure in the event of a short-circuit).

Dimming of the output up to 50%

Measurement of the neutral current at 50%