ADB EURODIM TWIN TECH, Руководство по установке

Страница: 123 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 21
Issue 1.1
Example of a
circuit‟s output voltage:
Entry DMX channel value (50%) 120 V law Mult. fact.: 50%
230 V 115 V 57 V 29 V
Use the wheel in order to rapidly move to the row of a circuit. The row selected is highlighted.
To attribute a law, position on a row:

Touch the zone where the current law is displayed, making the table of available laws
appear,

Touch to select the law from the table; the law selected is highlighted,

For the user laws, first select the number (between 1 and 6) using the + and - keys

Touch the highlighted zone to validate and attribute to the circuit.
To attribute a multiplying factor, position on a row:

Touch the zone where the multiplying factor is displayed in order to edit the value,

Enter the value using the numeric keyboard (between 0 and 100%)

Touch the zone where the new value is displayed in order to validate.
Important : after validation, this action has an immediate effect on the light dimming.
Note : If the value attributed is 100%, the screen displays "FF". Any value entered that is beyond
100 is limited to 100 (FF).
If the law attributed to a circuit is the switch law, the multiplying factor is forced to 100%
(FF) by the software.
16.1 Range Key
Used to attribute the same law and the same multiplying factor to a set of circuits, included within a
range.