ADB EURODIM TWIN TECH, Руководство по установке

Страница: 131 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 29
Issue 1.1
20. Cues Menu - Capture
Instead of entering the cues using the Editing function, this function is used to capture the highest
intensity of the sources present at the controller's input (DMX & ARTNET), this being the case for
each circuit, and to save it in a cue (from 0 to 80).
Selecting a cue
To select a cue, go to the cue number (highlighted), either by touching the screen or using the
wheel.
To edit the cue number:

Touch the screen or use the wheel to select the zone of the number in question,

Type the number using the keyboard,

Validate the cue by touching the screen to select the zone in question, or using the wheel.
Otherwise, press keyboard key 1 to scan the cues in ascending order, or press keyboard key 0 to
scan the cues in descending order.
Important : when a cue is edited, there is a loading time. The status row at the bottom of the page
informs the user of this status. Wait for the synchronisation to be complete in order to
obtain a correct reading of the intensities of each of the cue‟s circuits.
20.1 DMX/ARTNET Capture
Press the "CAPTURE" key to launch the memorisation operation. The values appear in the table
after a few seconds. The cue number is followed by an asterisk (*) to indicate that the captured
DMX/ARTNET values are displayed. Press the "SAVE" key to save the intensities in the cue
displayed. The cue becomes existing ("E").