ADB EURODIM TWIN TECH, Руководство по установке

Страница: 129 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 27
Issue 1.1
To edit the cue number:

Touch the screen or use the wheel to select the zone of the number in question,

Type the number using the keyboard,

Confirm the cue to be edited by touching the zone, or use the wheel.
Otherwise, press keyboard key 1 to scan the cues in ascending order, or press keyboard key 0 to
scan the cues in descending order.
Important : When a cue is edited, there is a loading time. The status row at the bottom of the page
informs the user of this status. Wait for the synchronisation to be complete in order to
obtain a correct reading of the intensities of each of the cue‟s circuits.
Attributing intensity
To attribute a control intensity, position on a row using the wheel:

Touch the zone where the intensity is displayed in order to edit the value,

Enter the value using the numeric keyboard (between 0 and 100%)

Touch the zone where the new value is displayed in order to validate.
To identically recopy the intensity of the preceding circuit, use keyboard key.
Note : If the value attributed is 100%, the screen displays FF. Any value entered that is beyond
100 is limited to 100.
Any value entered into a non-existing cue will render it existing.
The backup (validation) of the intensities is conducted upon leaving the cue or function.
19.1 Range Key
Used to attribute the same intensity to a set of circuits, included within a range.