ADB EURODIM TWIN TECH, Руководство по установке

Страница: 147 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 45
Issue 1.1
Enter:

The start dimmer number (From dim),

The end dimmer number (To dim),

The load to be attributed to these circuits (a table appears enabling the load to be selected,
see manual load selection),

Confirm with the OK button.
Note : the circuit's first number ("From dim") must be <
the circuit‟s second number ("To dim")
during definition of the range. Otherwise, the range between two circuits cannot be
validated.
The ALL key is used in order to directly enter the 128 circuits of the cabinet.
31.3 Automatically selecting the loads
Press the "AUTOMATIC" key; three options are available:

Measurement: the load information available in the "Measurement" column of all the circuits
is recopied to the "EDIT” column. After copying, the name of the left-hand column changes
and becomes "SCANNED",

Present: the information originating from the PRESENT column (see Power Configuration
menu) are recopied into the "EDIT" column. After copying, the name of the left-hand
column changes and becomes "PRESENT",

Reference: the information originating from the REFERENCE column (see Power
Configuration menu) are recopied into the "EDIT" column. After copying, the name of the
left-hand column changes and becomes "REFERENCE",
Select one of the options, either by touching the screen or using the wheel and confirm the choice.
Note : for the options PRESENT and REFERENCE, the column is updated automatically based on
what was defined in "conf.puiss."
Automatic selection: Reference