ADB EURODIM TWIN TECH, Руководство по установке

Страница: 139 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 37
Issue 1.1
Parameters displayed are:

Power info: the type of module used by the controllers.

Circuit qty .: Number of circuit in the module.

Circui t: position of the circuit taking into account the number of circuit in the previous
modules.

Patch A, B refers to the DMX patch for A and B.

Patch C, D, E : refers to the patch for Artnet universe 1, 2, 3.

Laws : laws applied to this circuit.

Multipl. Fact. : Multiplying factor applied to the circuit.
Note
: If a module contains less than four circuits, the circuits will be displayed with empty "------"
to indicate that there is not physically present in the circuit module.
Selection of modules and outputs.
To select a module or an output, position the cursor on the number of the module or the output
(highlighted), either by touchscreen or use of the dial.
To view the settings of the module:
- Touch the screen on the area of the number or use the wheel,
- Type the number on the keypad,
- Confirm the number by pressing on the touch sensitive area or using the dial.
Otherwise, press 1 to scan the keypad modules or outputs in ascending order or press the 0 key
on the keyboard to scan the modules or the output in descending order.
The field module and output are related, that is to say that if you manually change the field or
output module to the other will automatically update.