ADB EURODIM TWIN TECH, Руководство по установке

Страница: 121 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 19
Issue 1.1

The touch-screen and the numeric keyboard to enter a value,

Press key 1 directly to increment the value by 1 (between 1 and 512) in relation to the first
value available on a previous row,

Press key 0 directly to decrement the value by 1 (between 1 and 512) in relation to the first
value available on a previous row,

The Range key in order to enter values between two circuit references.
Important : Specific case for row 1/1: if key 0 or 1 is used, the value taken into consideration
corresponds to the content of output 128 if available, otherwise output 127, and so on.
If the value entered is 0 or greater than 512, the circuit is not controllable and the
message "Not used" is displayed.
15.1 Range Key
Used to attribute an ascending patch value in graduations of 1 to a set of circuits, included within
one section.
Enter:

The start dimmer number (From dim),

The end dimmer number (To dim),

The start channel value to be taken into consideration for incrementation in graduations of 1,

Confirm with the OK button.
Note : the circuit's first number ("From dim") must be <
the circuit‟s second number ("To dim")
during definition of the range. Otherwise, the range between two circuits cannot be
validated.
The ALL key is used in order to directly fill-
in the cabinet‟s 128 circuits.