ADB EURODIM TWIN TECH, Руководство по установке

Страница: 124 / 166

EURODIM TWIN TECH
www.adblighting.com User Manual - Page 22
Issue 1.1
Enter:

The start dimmer number (From dim),

The end dimmer number (To dim),

The law to be attributed to these circuits,

The multiplying factor to be attributed to these circuits,

Confirm with the OK button.
Note : the circuit's first number ("From dim") must be <
the circuit‟s second number ("To dim")
during definition of the range. Otherwise, the range between two circuits cannot be
validated.
The ALL key is used if we wish to enter the cabinet‟s 128 circuits directly.
17. Power Configuration Menu
This function configures the module type depending on its position in the cabinet.
Reminder
The referencing of the modules in the cabinet starts at 1 in relation to the first location situated at
the top of the cabinet, up to 32.
The left-hand column contains the referencing of the modules and circuits present in the cabinet:

Example: Value 1/1: references module 1/circuit 1 of the module

The right-hand figure indicates the output on the cabinet (from 1 to 128)