ABB i-bus KNX JRA/S 6.230.3.1, Руководство по эксплуатации продукта

Страница: 37 / 152

ABB i-bus
®
KNX
Commissioning
JRA/S 6.230.3.1 | 2CDC506083D0201 35
Set standard values after download
or ETS reset
Options: No
Yes
•
No : The standard values are not applied after a download or ETS reset.
•
Yes : The standard values are applied after a download or ETS reset.
Assignment to scene number
(No. 1...64, 0 = no assignment)
Options: 0…64
The scene values are undefined by default and must therefore be learned once via the bus.
The Scene function manages up to 64 different scenes via a single group address. With this group
address, all slaves integrated into a scene are linked via a 1-byte group object. The following information is
contained in a telegram:
•
Scene number (1…64) and
•
Telegram: Recall scene or Store scene.
Each blind can be integrated in up to eight scenes. For example, the scene can move the blind UP in the
morning and DOWN in the evening, or the blind can also be integrated into a light scene.
If a telegram is received on the Scene group object, on all outputs assigned to the sent scene number the
blind moves to the stored scene position or stores the current position as the new scene position.
For further information see: Group objects Output E, F: Blind and Shutter, p. 109, Scene function, p. 133 and
Code table, 8 bit scene, p. 143
Standard value position
in % [0...100]
Options: 0…100
This parameter determines the position, in percent, to which the blind should move when the scene is
recalled.
Standard value slat
in % [0...100]
Options: 0…100
This parameter determines the slat position, in percent, to which the blind should move when the scene is
recalled.