ABB HVC-PD, Руководство по установке, Страница: 117 / 146

HVC ‐ PD E ‐ Bus Charger Installation Guide
Document: V1.2 / Document No.: 6AGA000008-0629-EN | Date: 06-30-2022 Page 117 of 146
X2 Pantograph heater cable
1 Wire 1 ACS L Heater
2 Wire 2 ACS N Heater
PE2 GND (green/yellow) GND
X3 X4 Interlock / DC Guard cable
5 Shield GND
1 White Interlock In
2 Brown Interlock Out
3 DC_Guard_A
4 DC_Guard_GND
X3 X4 Next Interlock / next DC Guard cable
(only for sequential mode)
6
5 Next_Interlock_In
6 Next_Interlock_Out
7 Next_DC_Guard_A
8 Next_DC_Guard_GND
X3 X4 Pantograph CP/PE cable
4 Shield GND
9 Wire 1 CP
10 Wire 2 PE
X3 X4 ACS Control cable
1 Wire 1 ACS +24V
2 Wire 2 ACS -24V
3 GND (green/yellow) GND
11 Wire 3 ACS Extend/Retract Out
12 Wire 4 ACS Magn Reed In
13 Wire 5 ACS Supply/Retract Out
14 Wire 6 ACS Retracted In
15 Wire 7 ACS Magn Supply Out
16 Wire 8 ACS GND_B
17 Wire 9 ACS Extended In
X4 EMO cable
19 Wire 1 EMO S1
20 Wire 2 EMO S1
21 Wire 3 EMO S2
22 Wire 4 EMO S2
X4 Beacon cable
23 Wire 1 Beacon PCB1_OUT1
24 Wire 2 Beacon PCB1_OUT2
25 Wire 3 Beacon PCB3_OUT3
26 Wire 4 Beacon PCB4_+24V
X4 Distance sensor cable
31 Wire 1 Distance 24V
33 Wire 2 Distance Sensor NO/NC
32 Wire 3 Distance Sensor GND
34 Wire 4 Distance Sensor Analog out
13. Tighten the connector screws with a tightening torque of 1.0 ft-lb.