ABB FSPS-21, Руководство пользователя

Страница: 113 / 214

are transmitted from the FSPS-21 module to the safety PLC. For a detailed description of
the PROFIsafe message format, see section
PROFIsafe message format (page 113) .
F-Parameters are PROFIsafe parameters that all PROFIsafe devices support. F-Parameters
are sent from the F-Host (safety PLC) to the F-Device (FSPS-21 module) when the
PROFIsafe connection is created. They contain the PROFIsafe addresses and the watchdog
time for the PROFIsafe connection.
Note:
We recommend that you use only PROFINET compatible Ethernet switches and cables in
the PROFIsafe communication bus.
FSPS-21 module passivation
If the FSPS-21 module or the safety PLC detects an error in the fieldbus communication,
the FSPS-21 module is passivated. The module activates the STO function, goes into Safe
state and generates an FSx safety bus warning (0xA7DD).
PROFIsafe description
￭ PROFIsafe message format
The FSPS-21 module supports only the PROFIsafe short frame format. The short frame
supports a maximum of 12 octets of user data. The frame also includes a CRC (3 octets)
and one Status/Control Byte octet. Therefore, the maximum frame size of the message is
16 octets.
CRC2 Status / Control Byte F-Input / F-Output user data Data
3 1 Max. 12 Size (octets)
Control Byte and CRC2 bit order
PROFIsafe messages sent from the safety PLC to the FSPS-21 module include the F-Output
user data, the Control Byte and CRC2.
This table shows the bit order of the Control Byte and CRC2. N
o
is the length of F-Output
user data.
Description Name Bit Octet
Control Byte
The value is ignored. Reserved 7 N
o
The value is ignored. Reserved 6
Toggle bit Toggle_h 5
Fail-safe values (FV) to be activated Activate_FV 4
Use F_WD_Time_2 (secondary watchdog). Not in use. The value
is ignored. Use_TO2 3
Reset Vconsnr_d R_cons_nr 2
Operator acknowledgement requested OA_Req 1
Parameter assignment deblocked. Not in use. The value is ignored. iPar_EN 0
PROFIsafe 113